Learn why your Brita filter light indicator is not working and how to fix the Brita faucet filter indicator light not working You’ll be able to take the faucet apart, find the problem and make the repair.
Many BRITA filters include a handy electronic indicator that monitors and informs you about the filter’s life. Modern Brita faucets and pitchers feature a filter light with a traffic light color system of green, amber/yellow, and red to signal when the system’s filter needs to be replaced.
However, the indicator light on your Brita filter may fail, making it impossible to determine when the filter needs to be replaced.
How does the Brita faucet filter indicator work?
When it’s time to replace your filter, the Brita filter indication light illuminates. It turns on when the lid is opened for 5–8 seconds (depending on the size of the reservoir) and counts the number of times the reservoir is filled.
It is important to always monitor your Brita filter lights. When you are trying to replace your Brita water filter, the light may not always work. This is due to sometimes it doesn’t turn on when they open the lid for 5-8 seconds.
The Brita filter indicator light is vital to ensuring that your water is clean and healthy for drinking. It will turn on when you open the lid of the reservoir, and it will count how many times you filled up the reservoir. It is important to always monitor your Brita filter lights because sometimes they will not turn on when replacing them and it may be due to a power outage.
The filter has a predetermined life of approximately 40 gallons. When the limit is reached, the indicator will notify the consumers that it is time to replace the device.
On top of it, an LED light begins to blink. As you begin to use the filter, you will see that the bar on the indicator begins to lower.
When the bar approaches the end and the screen goes completely blank, it means the filter’s life has come to an end and you must replace it.
The Yellow LED indicates that you have only two weeks left. You should purchase a new filter from the manufacturer before the current one wears out.
The presence of red light indicates that the filter has already reached its typical usable life. Following this, the dangerous ingredient will be present in the water filtered by Brita.
The longevity of the Brita filter is determined by a number of factors. The hard water causes the filter to run low and become exhausted more quickly.
In general, the filter lasts 2 to 3 months, but in the case of hard water, you may need to change it in one month if it reaches its maximum filtration capacity.
The Brita filter indicator’s principal function is to count the number of times you fill the pitcher. It assumes how many gallons of water you have filtered based on the number. However, when your Brita faucet filter indicator light stops working, it means that something is wrong with the battery.
Why is my Brita Filter Light not Working?
The reason your Brita Filter indicator light stopped working is due to a bad battery. After 2-5 years, the indicator light on a Brita faucet filter may stop operating because of the non-replaceable sealed battery running out.
Brita manufactures a range of water filtration systems, and the light indicator varies depending on the device. In this case, If your facet filter is still under warranty, contact Brita support to get it serviced or replaced.
The most recent Brita faucet and pitcher filters utilize an indicator light to indicate when the filter needs to be replaced. Sometimes the Brita faucet filter light does not work. Which makes determining the exact time when the filter needs to be replaced difficult.
As traffic light signals serve a critical function in improving mobility. Similarly, the Brita indicator is useful for determining the life of a filter. Due to a lack of reliable filter data, your water quality may suffer, and your filter may end up causing more harm than good.
How to Fix the Brita Filter Indicator Not Working
In order to fix the Brita filter indicator, you must first know what it is. The indicator is a blue light that will tell you when your water has been filtered and needs replacement.
If this light does not work for any reason, there are some steps on how to troubleshoot it including running through a few tests with different filters or checking if the circuit breaker in your home is tripped.
If the indicator light on your Brita filter stops working entirely after 2-5 years of usage, contact Brita support for outright repair and replace especially if you are still in the warranty window.
If the indicator is not working, it’s possible that there are dead batteries in it. It would be best to replace them with fresh ones before continuing on with the process.
If your battery stops working during the warranty period, you can contact Brita customer service or go to a nearby store. You will be able to get an exchange for a new filter at no cost if it is within 30 days of purchase and there are no other issues with the product itself.
If it’s not within this time frame, then you’ll need to return your old filter in order for them to issue an exchange that won’t require any money out of pocket on their part!
You should not use any filters beyond what they instruct since this can cause damage and leakage.
The Brita filter indicator is supposed to warn when the water in your pitcher needs changing. When it doesn’t work, it’s probably because you are using more than what was intended by the manufacturer or that there has been a mechanical failure of some sort inside of the unit.
The Brita filter indicator tells the user about the condition of the filter. If it has a red light, there is no water coming through and you should replace your filter soon.
Mike Spencer
Hi Guys, Mike is a Mechanical Engineer who specializes in Heating, Ventilation, and Air-conditioning. His love for humanity and his profession propels him to share useful and factual Information on this blog.