Can you install a water softener outside? Having a water softener is a great effect on your water. It removes the calcium and magnesium from the hard water, making it soft again! But can an outside installation work?
Many people are hesitant to install their own water softener because they are afraid of the installation process. A lot of people don’t have any experience with water fixtures, so they would rather just buy a pre-installed one that is already set up. But if you are handy with tools, then an outside installation is the way to go!
Can I install my water softener outside?
Yes, You can install a water softener outside, but you should be careful. A water softener is an appliance that removes calcium and magnesium ions from the water supply to prevent scaling, corrosion, and other problems. You can install your water softener on a flat, level surface outside if it is not raining or snowing. The unit must be located near where your home’s incoming water enters so that it can process all of the contaminants in the bathtub, sink, or toilet before they’re released into your tap.
Additionally, you should consult with an expert who will help determine if any special requirements need to be met such as having less than 100 degrees Fahrenheit outside temperature or being more than 10 feet away from electrical sources like power lines.
Learn how to find the best location for your softener and what to look out for in your installation process.
How to Find the Best Location for a Water Softener Outside
Finding the best location for a water softener outside is not as simple as it seems. A good location will be flat, level, and where the water enters your home.
If you’re wondering whether or not a water softener can be installed outside, the answer is yes. Sometimes, you may have to work with your local government to get approval from them first before being able to install it outdoors.
While you might think that installing a water softener outside is possible, it’s not always the best idea. A softener has two tanks: media and brine. If there are any freezing temperatures or if there are cracks in the distributor tube below freezing levels, then installation will be impossible for an outdoor location to work properly.
The ideal placement of your water softener depends on where you live and what type of usage patterns you have with your property.
The sun can damage the water softener’s tank. Therefore, it is important to find a location that has shade or protection from the elements. It is also worth noting that depending on where you live in terms of climate, some locations may be better than others for installing your water softener outside.
Best Water Softeners for Outdoor Use
Whirlpool WHESFC Pro Series Softener
Make an investment in a water softening system that has greater mineral removal capabilities for your entire home. Your family will have access to great-tasting water with the Whirlpool Pro Series hybrid home filter.
This water softener is a colossus when it comes to removing toxic minerals and other impurities from the water. This NSF-certified machine is capable of removing the following pollutants: calcium, magnesium, lead, iron, and chlorine.
WHESFC Pro’s above-average hardness removal rating of 120 gallons per gallon validates its supremacy. For both indoor and outdoor usage, this is a smart investment because of its 31,000-grain capacity and 3-ppm iron removal capability.
If you and your family suffer from dry and itchy skin, investing in a water softener will be well worth it. As a result, you’ll save a bundle on shampoo and soap.
At home, there will be no scale buildup. Having soft water can help keep your faucets and showerheads cleaner longer.
Using appliances that come into touch with water increases their longevity by 30 to 50 percent. Soft water also helps keep your electronics in top shape. This appliance will have a huge impact on water heaters, washing machines, and dishwashers.
The Whirpool water softener is a fantastic choice for outdoor use, even though it is a bit tricky to install for non-techies. Whirlpool’s WHESFC Pro Series refrigerators are designed to help you save money on salt by using less of it. Rather than waiting until you need it, this water softener responds to your needs on-demand.
This type uses up to a quarter less salt than the others. The latest innovation allows for regeneration just when necessary, resulting in less salt use over time.
Are you fed up with always having to replace the water softener filters? This hybrid softener’s filter gets cleaned every 14 days, which is an additional reason to buy it. The well-known brand does live up to its reputation as being both affordable and affordable.
Ecopure EPHS007 Conditioner-Water Softener
The Ecopure Water Softener and Filter System are well worth the money you’ll spend on it. It’s one of the most advanced water purification systems available, ensuring that every family has access to soft, clean water.
This effective water softener uses auto-sensing technology to determine how much salt and water it needs to renew. By just using what’s absolutely required, you’ll save money over time on salt and water.
Having separate water filtration and softening devices is a hassle. This household appliance will take care of everything. With the Ecopure, sediments and hardness are reduced and dangerous pollutants are eliminated.
The Ecopure Water Softener works effectively with both city and private well water. This water softening and filtration system is suitable for both urban and rural regions.
It’s also a cinch to set up this device. Everything you need is provided, and it may be used indoors or outdoors according to your preferences. Also, because of its small size, you may relax knowing it won’t take up a lot of room in your home.
With its integrated and straightforward programming controls, it requires little maintenance. Are you concerned about the low salt content? It features an indicator light that tells you how much salt is left in your machine.
This is suitable for households with 1-6+ members and removes 100 grains of hardness each gallon. You’ll never experience hard water again in your house because of this device.
Replace your Kenmore water softener with this precise part if yours has failed. As long as your previous one wasn’t hidden away in a cabinet, this one will fit exactly where your old one did.
Factors to Consider for Installation of Water Softeners Outside
These are important things you should know before you install your water softener outside the house.
Temperature
Water softeners need to be installed in a location that is between 55-75 degrees Fahrenheit. When looking into an outdoor installation, the temperature of the area should be taken into account.
The reason for these temperature requirements is because the components in a water softener can be damaged when exposed to temperatures below 76 degrees Fahrenheit and above.
Sunlight
When installing a water softener outside, it is important to consider the factors of sunlight. UV rays can deteriorate the resin bed and weaken any plastic or composite parts. As the sun shines on a fiberglass resin over time, it will cause deterioration. Fiberglass is not affected by sunlight because of its reflective properties.
Accessibility
The best place to install a water softener is in an area that has easy access, so it can be easily serviced. Some factors to consider when choosing the best location for your water softener are convenience, accessibility, and cost.
If you live in a house and need extra salt bags for your water softener, make sure that there is enough space to store them.
Drain and Power Source
There are many factors to consider when installing a water softener outside. Drain and power source are two main factors that should be considered for the installation of any water softener. This is very important to check before purchasing one.
How do I keep my water softener from freezing?
The resin tank that makes up the majority of a water softener is typically made out of fiberglass, which offers little thermal insulation. As a result, water softeners are at risk for freezing when installed outside in cold temperatures. To prevent your quartz sand from freezing, make sure to install an outdoor condenser on top of your system to keep it warm and running smoothly.
It’s also important to keep your water softener from freezing when you live in a cold climate. The system must be installed outside, but it can still freeze very quickly if the outdoor temperature changes or there is windy weather.
However, this shouldn’t deter you from installing the unit because an indoor unit will not provide any benefits and may even cause damage due to the frosting of pipes that are near or underground level.
If there is any chance of freezing, electric heat wrap tape can help prevent it. This process will make sure that your water softener doesn’t freeze and break down while you’re not using it.
Do you have to bury a water softener if it is outside?
When considering if you have to bury a water softener, it is best to consider the location of your property. If you are installing your water softener on the side of your home, then there’s no need for an installation that is far away from where you live or work. However, if the location is not ideal and burying it will be too difficult or expensive, then you may want to consider moving it indoors.
If you’re installing a water softener outside, the best option is to bury it. This will protect your water softener from theft and make noise when someone tries to dig up or remove it.
The water softener should be buried a few feet deep, but it shouldn’t be too close to trees or bushes. It’s best if the base of your water softener is protected from getting damaged by packing dirt tightly around it.
In conclusion, you can install your water softener outside if it is protected with a weather cover.
Mike Spencer
Hi Guys, Mike is a Mechanical Engineer who specializes in Heating, Ventilation, and Air-conditioning. His love for humanity and his profession propels him to share useful and factual Information on this blog.
